Disclaimer: GloboMechanic.com is reader-supported. When you purchase through links on this site, we may earn an affiliate commission at no extra cost to you.

10 Best 5.3 Intake Manifold in 2022

Finding the best 5.3 intake manifold is not an easy task. There are hundreds of similar products on the market which can cater to your needs, but only a few of them stand out from the rest. We have researched hundreds of customer reviews and feedback from all around the web before we made our top 10 list of 5.3 intake manifold . We did the heavy lifting, and made the process easy for you. So without further ado, let’s get into the list.

10 Best 5.3 Intake Manifold – Top Picks of 2022

Product 1
A-Team Performance - Intake Manifold 102mm Throttle Body Fabricated Metal Sheet - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver
  • Intake Manifold 102mm Throttle Body Fabricated TIG Welded Aluminum Metal Sheet
  • Compatible with Cathedral Style LS1 LS2 LS6 4.8/5.3/5.7/6.0 Heads
  • Includes: Black Intake Manifold, Black Throttle Body, Black Fuel Rails, and Fuel Crossover Line; Also includes Gaskets and Hardware
  • This intake is about 2" taller than stock
  • Black 3mm Sheet Metal Aluminum
Product 2
LSXrt 102mm Intake Manifold for GM LS 4.8/5.3/6.0L Truck with Cathedral Port Heads
  • Designed for late model GM 4.8/5.3/6.0L port truck engines and all LS1, -2, -6 based engine race applications with appropriate cowl clearance.
  • Multi-layer modular design with removable runners for easy disassembly and porting.
  • 102mm inlet works with 90, 92, or 102mm throttle bodies for high flow and minimal restriction.
  • Advanced polymer material is strong, lightweight and cools intake charge for enhanced power.
  • Big gains in rear-wheel hp yet retains factory fitments and under-hood clearance requirements.
On SaleProduct 3
Top10 Racing Intake Manifold with Fuel rail fit 92mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black
  • Compatible for Cathedral Port LS1/LS2/LS6 Heads
  • Hardware - 3mm (1/8") Thick T6061 Sheet Aluminum Construction
  • Fit for Throttle Body - 92mm (Throttle Body not include)
  • High Quality- The Intake Will Not Bend or Flex With Boost or Vacuumm Bore Throttle Body Openings
  • Fabrication by Tig Welded Aluminum
Product 4
A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver
  • Silver Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum
  • Fabrication - TIG Welded Aluminum
On SaleProduct 5
TEMSONE 102MM Intake Manifold Sheet Metal Fabricated EFI with Fuel Rails and Throttle Body & Throttle Position Sensors TPS IAC Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Black
  • ✅【PREMIUM MATERIAL】 This LS intake manifold is fabricatd from high quality T6061 aluminum, thickness of 3MM(0.125IN) and finished in silver.
  • ✅【UNIQUE DESIGN WITH MAP PORT】 MAP port is available for MAP sensor at the rear of the intake manifold
  • ✅【FITMENT】 FITS for GM LS LS1 LS2 LS6 cylinder heads with cathedral intake ports and Compatible with 2005-2007 Chevro-let Corvette 🔧 2006-2009 Chevro-let TrailBlazer SS 🔧 2004-2005 Cadillac CTS V-series 🔧 2005-2006 Pontiac GTO;2006-2007 Cadillac CTS V-Series 🔧 2008-2009 Saab 9-7X Aero 🔧 2005-2006 Chevro-let SSR 🔧 1997-2004 Chevro-let Corvette 🔧 1998-2002 Pontiac Firebird Formula, Trans AM 🔧 2001-2004 Corvette Z06.
  • ✅【SIMPLE AND QUICK INSTALLATION】 All necessary hardware is provided so you can have a hassle free automotive replacement installation. Package included 1 * 102MM Intake Manifold, 1 * 102MM Throttle Body with TSP & IAC, Gaskets, Hardwares,2 * Fuel Rails,1 * Fuel Crossover Lines.
  • ✅【PURCHASE WITH CONFIDENCE】 If you're not 100% satisfied with our products, simply return it for a full refund within 30 days. Any questions please feel free to reach out to us, we will reply to you within 24 hours. Your satisfaction is fully guaranteed.
On SaleProduct 6
102mm Intake Manifold for Cathedral Port Heads LS1/LS2/LS6 LS Based Engines, Compatible with Corvette, SSR,TrailBlazer SS/Cadillac CTS V/Pontiac GTO/Saab 9-7X Aero(Throttle Body and Sensor Included)
  • Compatible with Cathedral Port LS LS1/LS2/LS6 (6.0L 5.6L 5.3L 4.8L) heads.
  • Applications: Original LS1/LS2/LS6 Engines: 1997-2004 Chevy Corvette, 1998-2002 Pontiac Firebird Formula, Trans AM, 2001-2004 Corvette Z06, 2004-2005 Cadillac CTS V-series, 2005-2007 Chevy Corvette, 2005-2006 Chevy SSR, 2006-2009 Chevy TrailBlazer SS, 2006-2007 Cadillac CTS V-Series, 2005-2006 Pontiac GTO, 2008-2009 Saab 9-7X Aero.
  • Performance: Not only does this manifold gonna make your engine look just amazing when you pop the hood, it also adds a TON of air flow!! This is a must have for any high performance racing engines!
  • Durable Material Made: The intake manifold is made of 3mm (1/8") Thick T6061 Sheet Aluminum, it will not bend or flex with boost or vacuum, fabrication by Tig Welded Aluminum.
  • Risk-free Purchase: Please contact us in time if any product and service problem, we will do everything we can to help you! We suggest that you go to the nearby auto repair shop, just to make sure a proper installation on the replacement.
Product 7
FAST LSXr 102mm Intake Manifold for LS1, LS2, and LS6 (146302B), black
  • Longer runners & larger air inlet than stock deliver added HP while maintaining low-RPM torque
  • Available in a sleek black finish for stunning good looks when installed on any LS engine
  • Modular, removable runner design allows for easy disassembly & porting
  • Advanced polymer material makes intake lighter than aluminum & run much cooler
  • C.A.R.B.-approved no. D-279-8
Product 8
A-Team Performance - Fabricated Intake Manifold w/Drive By Wire 102mm EFI Throttle Body - Compatible with LS LSX LS1 LS2 LS6 Black
  • 102mm Black Intake Manifold with EFI Drive by Wire 0° Opening Throttle Body Complete with Gaskets, Hardware, Black Fuel Rails, & Fuel Crossover Line
  • Compatible with Chevrolet Small Block V8 GEN. III/IV (LS-Based) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2)
  • Compatible With Cathedral Port LS LSX LS1 LS2 LS6 heads
  • Hardware - 3mm (1/8") thick T6061 Sheet Aluminum construction
  • Durability - The intake will not bend or flex With Boost Or Vacuum
Product 9
Ballmers 102mm Intake Manifold + Throttle Body with Throttle Position Sensors TPS IAC and Fuel Rails Sheet Metal Fabricated EFI Compatible with Cadillac Chevy GMC Corvette Pontiac LS LS1 LS2 LS6
  • 【Compatibility】: Original LS1/LS2/LS6 Engines: 1997-2004 Chevy Corvette, 1998-2002 Pontiac Firebird Formula, Trans AM, 2001-2004 Corvette Z06, 2004-2005 Cadillac CTS V-series, 2005-2007 Chevy Corvette, 2005-2006 Chevy SSR, 2006-2009 Chevy TrailBlazer SS, 2006-2007 Cadillac CTS V-Series, 2005-2006 Pontiac GTO, 2008-2009 Saab 9-7X Aero.
  • 【High Quality】: The intake manifold is made of 3mm (1/8") Thick T6061 Sheet Aluminum, it will not bend or flex with boost or vacuum, fabrication by Tig Welded Aluminum.
  • 【102mm Intake Manifold】: Evenly distributes the combustion mixture (or air in a direct injection system) to each intake port in the cylinder head for perfect function. It comes with Throttle Body and Fuel Rails.
  • 【Package Including】: Intake Manifold, 102mm Throttle Body, Gaskets, Hardware, Fuel Rails, Fuel Crossover Line.
  • 【Warranty】: This 102mm Intake Manifold + Throttle Body Kit comes complete with 1 Years warranty. Worry-Free Return And Refund Policy, Buy with Confidence! If you have any questions, please contact us with the frame number, and we will provide you with the most correct advice.
Product 10
A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 EFI Black
  • Intake Manifold with 102mm Throttle Body Fabricated 3mm Sheet Metal .
  • Compatible with cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads
  • The intake will not bend or flex with Boost Or Vacuum.
  • Intake is about 2" taller than stock.
  • Includes Black Intake Manifold, Black DRIVE BY CABLE Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line

Best 5.3 Intake Manifold Buying Guide

Last year alone, we spent nearly three hundred billion dollars on more than two million products. That’s a ton of money being pumped into the marketplace. But how can you best guarantee you will get your hands on the best products? That’s why it’s important to have the proper advice before spending your money on 5.3 intake manifold . That’s exactly what this guide is for. We’ve explained all the important aspects to look for and compiled all our findings into a comprehensive list, so you can easily access the information that you need.

  • Quality of the product: Quality is something that you should always be concerned about when purchasing the 5.3 intake manifold . These days you can find so many products that are of bad quality that it is extremely difficult to tell the good ones from the bad ones.
  • Features of the product: Product features tell you if it will suit your needs and help you to make the right choice. However, features are not all the criteria for choosing a product. You also need to make sure that it works as described.
  • Price of the product: Price is another essential factor you should consider when you are shopping for 5.3 intake manifold . Think about how much you need the product and compare it to the price you are willing to pay. Try to choose the item that you can afford and avoid paying overpriced products.
  • Existing customer reviews: When buying new 5.3 intake manifold , you should always look for customer reviews. Because customer reviews tell you what other customers think about the product, they help you avoid making costly mistakes.
  • Online marketplace: What marketplace you’re buying the 5.3 intake manifold from is going to make a difference. If you’re buying it off Amazon, make sure the seller has a good reputation with a comparatively lower Best Seller Rank (BSR) in the category where the product is listed. Please don’t buy it off a random person that only has a few reviews.

Final Words

So now you have all the information on the best 5.3 intake manifold , and it’s your time to pick the suitable 5.3 intake manifold for yourself. You can choose from our list without any hesitation. And don’t forget, you can’t go wrong with our recommendation.