Disclaimer: GloboMechanic.com is reader-supported. When you purchase through links on this site, we may earn an affiliate commission at no extra cost to you.

10 Best Dac For Raspberry Pi in 2022

Finding the best dac for raspberry pi is not an easy task. There are hundreds of similar products on the market which can cater to your needs, but only a few of them stand out from the rest. We have researched hundreds of customer reviews and feedback from all around the web before we made our top 10 list of dac for raspberry pi. We did the heavy lifting, and made the process easy for you. So without further ado, let’s get into the list.

10 Best Dac For Raspberry Pi – Top Picks of 2022

Product 1
InnoMaker Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero etc. (DAC HAT)
  • The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
  • Absolutely perfect to support all Raspberry Pi music playback system, like LibreElec, OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
  • Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
  • On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
  • Comes with software, document and friendly technology support. For more information, please refer to our wiki(view the link on color page comes with the goods).
Product 2
innomaker Acrylic Case DAC Hat HiFi Audio Module Works with Raspberry Pi 4 3B+ 3B 3
  • Packing List: 1 x Acrylic Case; 5 Group Screws.
  • Acrylic Case for Raspberry Pi HiFi DAC HAT
  • The HiFi DAC Hat compatible with Raspberry Pi 4/3B+/3B/3 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
  • InnoMaker DAC Hat support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
  • HiFi DAC Hat on-board Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
Product 3
Geekworm Raspberry Pi HiFi DAC HAT PCM5122, Raspberry Pi 4B/3B+ X930 V1.3 HiFi DAC HAT with Power Management Function for Raspberry Pi 4B/3B+/3B/3A+/2B/B+/Pi Zero/Zero W
  • √The X930 HiFi DAC for Raspberry Pi adds a high-quality sound compatible with Raspberry Pi4B/3B+/3B/3A+/2B/B+. Recommend HAT size acrylic case(ASIN:B074T7D1V5). √ Support operating system: Moode Audio Player, OSMC, Openelec, Raspbian Jessie, Volumio, Pi Core Player, Max2Play, RuneAudio etc.
  • √Power supply: 5Vdc ±5%,≥3A recommended, Power via DC Jack or Type-C port of X930. You can use this certificated DC 5V 4A PSU (ASIN: B07413Q5Y4).
  • √GPIO used for I2S audio : LRCK - IO19, BCK - IO18, DATA - IO21; GPIO used for power management: IO5, IO12, IO13; Analog audio output level: 2V RMS; Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
  • √Packing List: X930 V1.3 Expansion Board x 1; Screw M2.5 *5mm x 8; Spacer F/F M2.5 *12mm x 4; Note:The CSR8675 Premium Bluetooth5.0 Audio Module and Raspberry Pi are not included in the packing list.
Product 4
Argon x NanoSound ONE Case - Hi-Fi Raspberry Pi Audio Player | Argon ONE Case with Raspberry Pi HiFi DAC (Digital to Analog Converter) | Rpi4 Not Included
  • The Nanosound One is an Argon ONE Raspberry Pi 4 Case that has been redesigned to include a built-in Raspberry Pi DAC Hat while fully supporting Volumio and ROON.
  • The Texas Instruments PCM5122 chipset helps the Raspberry Pi DAC Case provide audio at 192kHz Sampling Rate and 24bit Resolution with 112-db SNR for High Fidelity music.
  • The I²S bus in this Raspberry DAC offers low jitter. This allows the Argon Raspberry Pi 4 Case to provide a smooth, and comfortable listening experience.
  • Includes an Infrared Receiver and Remote Control to fully control your Raspberry Pi Music Player; making it very easy to get started playing music on your Argon Case.
  • The Hi-Fi Audio Player also acts as a heatsink for the Raspberry Pi 4 Board; Giving additional cooling to the board while it's playing music all day long.
Product 5
HiLetgo PCM5102 I2S IIS Lossless Digital Audio DAC Decoder Module Stereo DAC Digital-to-Analog Converter Voice Module for Arduino Raspberry Pi
  • 1.The DAC Module provides a super affordable high-quality DAC for the Raspberry Pi.
  • 2.Since it's digital audio, it sounds really good, much better than the onboard analog audio.
  • 3.The stereo jack comes soldered onto the board already.
  • 4.Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface
  • 5.Since it's digital audio, it sounds really good, much better than the onboard analog audio. The stereo jack comes soldered onto the board already.
Product 6
Octo 8 Channel Sound Card for The Raspberry Pi
  • 8 channels out, 6 channels in, operating over the GPIO header
  • Linux ALSA driver already integrated into the stock Raspbian release
  • DAC and ADC : 96 kHz, 24 bit audio.
  • Customisable analogue breakouts, RCA connectors supplied, Differential lines available.
Product 7
Waveshare WM8960 Hi-Fi Sound Card HAT Stereo CODEC Playing and Recording I2S Interface for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,low power consumption, supports stereo encoding / decoding, features Hi-Fi playing / recording, what's more, it can directly drive speakers to play music.
  • Integrates WM8960 low power stereo CODEC, communicates via I2S interface, integrates dual high-quality MEMS silicon Mic, supports left & right double channels recording, nice sound quality
  • Onboard standard 3.5mm earphone jack, play music via external earphone, onboard dual-channel speaker interface, directly drives speakers,supports sound effects such as stereo, 3D surrounding, etc.
  • CODEC: WM8960; Power supply: 5V; Logic voltage: 3.3V; DAC signal-noise ratio: 98dB; ADC signal-noise ratio: 94dB; Earphone driver: 40mW (16Ω@3.3V); Speaker driver: 1W per channel (8Ω BTL)
Product 8
anidees Aluminum Extra High Pi case for Raspberry Pi 4 Model B, HiFiBerry DAC+(RCA Version) – Black (AI-PI4-BB-HIFI)
  • Aluminum casing with cutouts for HiFiBerry DAC+ (RCA version) / GPIO / Camera / DSI display cable.
  • 5mm thickness top cover to show off the system, Noise-Absorbing Feet, 2 Wood screws for wall mounting
  • More Possibility inside: 29.5mm space between PI4 and top cover. Aluminum has much better Heat dissipation compare with Plastic or ABS material.
  • Air flow: 2mm cutout on both sides, extra 3mm spacer can be installed for more thermal efficiency.
  • 【OEM/ODM Service】anidees is a professional and experienced manufacturer of metal processing, we offer customized service to OEM/ODM which would make your job easier, welcome to contact us for more information.
Product 9
Geekworm Raspberry Pi 4B/3B+/3B Full-HD DAC I2S Class-D TI PCM5122 Amplifier, X400 V3.0 Audio Expansion Board Sound Card | Music Player for Raspberry Pi 4 Model B/Raspberry Pi 3 Model B+ / 3 Model A+
  • Matching Metal Case for X400 V3.0 and PI 4B refer to ASIN: B07ZRNNB29
  • Wide range voltage 6V-26V input, it provides up to 60W power. Matching power supply refer to ASIN: B07NLR49L1
  • With manual volume adjustment switch; User manual refer to Geekworm WiKi search X400_V3.0.
  • Built in High quality Class-D stereo audio amplifier (TI TPA3118D2) & audio headphone amplifier (TI TPA6133A);
  • Onboard RCA connectors, 3.5mm stereo headphone jack, speaker & power screw terminals, and gold-plated high-current DC power jack;
Product 10
AD/DA Board for Raspberry,High-Precision Expansion Board Audio Module with 8-Channel 24-bit ADC and 2-Channel 16-bit DAC for Raspberry Pi A+/B+/2B/3B/3B+
  • 【ADS1256 chip】 - Onboard ADS1256 chip, 8-channel 24-bit high precision ADC (4-channel differential input), 30ksps sampling rate.
  • 【DAC8532 chip】 - Onboard DAC8532 chip, 2-channel 16-bit high precision DAC.
  • 【Input interface】 - Onboard pin header packages input interface, can be connected to analog signals, compatible with micro-snow sensor interface, easy to access various analog sensor modules.
  • 【Convenient】 - Onboard wiring terminals package input and output interface, can be connected to analog signals and digital signals, convenient for various applications.
  • 【Built-in AD/DA detection circuit 】- Built-in AD/DA detection circuit for easy observation of experimental phenomena.

Best Dac For Raspberry Pi Buying Guide

Last year alone, we spent nearly three hundred billion dollars on more than two million products. That’s a ton of money being pumped into the marketplace. But how can you best guarantee you will get your hands on the best products? That’s why it’s important to have the proper advice before spending your money on dac for raspberry pi. That’s exactly what this guide is for. We’ve explained all the important aspects to look for and compiled all our findings into a comprehensive list, so you can easily access the information that you need.

  • Quality of the product: Quality is something that you should always be concerned about when purchasing the dac for raspberry pi. These days you can find so many products that are of bad quality that it is extremely difficult to tell the good ones from the bad ones.
  • Features of the product: Product features tell you if it will suit your needs and help you to make the right choice. However, features are not all the criteria for choosing a product. You also need to make sure that it works as described.
  • Price of the product: Price is another essential factor you should consider when you are shopping for dac for raspberry pi. Think about how much you need the product and compare it to the price you are willing to pay. Try to choose the item that you can afford and avoid paying overpriced products.
  • Existing customer reviews: When buying new dac for raspberry pi, you should always look for customer reviews. Because customer reviews tell you what other customers think about the product, they help you avoid making costly mistakes.
  • Online marketplace: What marketplace you’re buying the dac for raspberry pi from is going to make a difference. If you’re buying it off Amazon, make sure the seller has a good reputation with a comparatively lower Best Seller Rank (BSR) in the category where the product is listed. Please don’t buy it off a random person that only has a few reviews.

Final Words

So now you have all the information on the best dac for raspberry pi, and it’s your time to pick the suitable dac for raspberry pi for yourself. You can choose from our list without any hesitation. And don’t forget, you can’t go wrong with our recommendation.